Difference between revisions of "Slotcar Platooning Communication"

From DCEwiki
Jump to: navigation, search
(User button)
(Notes)
Line 6: Line 6:
 
After reset sequence to measure the first initial communication on the oscilloscope, wait for cca 500 ms. The first drop in SRDY is just a disturbance, not the indication to be ready to receive data.
 
After reset sequence to measure the first initial communication on the oscilloscope, wait for cca 500 ms. The first drop in SRDY is just a disturbance, not the indication to be ready to receive data.
  
B1 USER: User and Wake-Up button connected to the I/O PA0
+
B1 USER: User and Wake-Up button connected to the I/O PA0. On SmartRF05 Evalution Board: P10-19.
  
 
== Random ideas ==
 
== Random ideas ==
  
 
[[Slotcar_platooning|Back to slotcar platooning]]
 
[[Slotcar_platooning|Back to slotcar platooning]]

Revision as of 14:04, 4 April 2014

General description

Oscilloscope settings

  • Use trigger in Normal mode, set it to descreasing edge of MRDY signal, timescale 50 us and y scale 1V, trigger to 1.5V. After using reset sequence, the data comes after cca 780-800 ms.

Notes

After reset sequence to measure the first initial communication on the oscilloscope, wait for cca 500 ms. The first drop in SRDY is just a disturbance, not the indication to be ready to receive data.

B1 USER: User and Wake-Up button connected to the I/O PA0. On SmartRF05 Evalution Board: P10-19.

Random ideas

Back to slotcar platooning